1. Canna plate should be stored in room temperature environment such as about 24 degrees, indoor humidity about 45%, no rain, sun, hardware and plate should be stored in a similar environment for more than 48 hours.

2. When handling the plate, the two ends of the plate should be lifted away, can not lift one end of the plate dragged on the plate, in the plate extraction.

3. The plate should be stored on the pallet, the size is flat, the four sides are aligned, and the upper and lower parts of the plate should be wrapped with appropriate packaging materials. It is forbidden to place them in a disorderly manner and lean against the wall.

Nowadays, with the rapid development of the city, many high-rise buildings, from airports, museums and gymnasiums to shopping malls, office buildings and restaurants, will be set up with considerate toilets. Professor Lynch once put forward that "although the general outline of the city may remain static for a period of time, the details will change constantly". So, how to customize the toilet partition, toilet partition customized process is what? The following by the United States Ankang for you to introduce the custom process of toilet partition.

High pressure decorative plate due to molding high temperature, high pressure pressing temperature more than 115℃, surface pressure more than 4.9MPa, so it has high strength, high density characteristics at the same time because of the surface tree Fat content is more than 50%), after curing the resin on the surface to form a dense protective layer so high pressure fire decorative board has good fire prevention, moisture-proof, water-proof, wear resistance, impact resistance, stain resistance and other characteristics of the surface decoration color has hundreds of kinds of sawing, drilling and other follow-up processing.

The canna canbe plate produced by bhgood industry has complete specifications, which is the most in the industry